frogcase2002 393 Posted January 6, 2014 The whole back can come off so we will be able to try other ports 1 Share this post Link to post Share on other sites
frogcase2002 393 Posted January 6, 2014 New speaker wire 1 Share this post Link to post Share on other sites
jcarter1885 995 Posted January 6, 2014 Time to install now, no excuses 0 Share this post Link to post Share on other sites
Aaron Clinton 2,372 Posted January 6, 2014 Nice amps to go with nice subs. Don't let Ryan know you have those amps. 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted January 6, 2014 Time to install now, no excuses I know I know lol. I want to bad. I was going to today but it was -10f and there was no way and I'm working on a few enclosures in the garage so there is no room 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted January 7, 2014 Anyone know anything about the stetsom 7k 12v. ? Can get one for cheap local to me but don't really know anything about them. How much of an upgrade do you think it would be from my aq3500 0 Share this post Link to post Share on other sites
redrider 5 Posted January 7, 2014 just went thru every page of this build... must say hell of a build. wasnt expecting that first box to come out and be changed. i liked the design of it. 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted January 7, 2014 just went thru every page of this build... must say hell of a build. wasnt expecting that first box to come out and be changed. i liked the design of it.Thank you. I really liked it to but need more space in my trunk and wanting to try a round port. . I'm going to do the baffle the same way but will have the round port on the driver side next to the subs and the top will be a little lower so I can put amps on top of the box.Also don't think I had enough port area with the last enclosure 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted January 7, 2014 Nice amps to go with nice subs. Don't let Ryan know you have those amps. Thanks. And yes really nice subs. Cant wait to get some real power on these 0 Share this post Link to post Share on other sites
redrider 5 Posted January 7, 2014 just went thru every page of this build... must say hell of a build. wasnt expecting that first box to come out and be changed. i liked the design of it.Thank you. I really liked it to but need more space in my trunk and wanting to try a round port. . I'm going to do the baffle the same way but will have the round port on the driver side next to the subs and the top will be a little lower so I can put amps on top of the box.Also don't think I had enough port area with the last enclosureyeah i think the baffle was the part that stood out for me with the old box. added a nice feature to the box. 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted January 12, 2014 Trying to get some work on the new build done. But Kinda backed up on other peoples enclosures. Hoping to get the front stage done this weekend 0 Share this post Link to post Share on other sites
cloud77 28 Posted January 12, 2014 I might be walling off 2 zcons in the spring =] 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted January 12, 2014 I might be walling off 2 zcons in the spring =]Should be nice! Let me know if you ever want any help with the build.. How much power are you thinking about running? 0 Share this post Link to post Share on other sites
cloud77 28 Posted January 12, 2014 I might need some pointers. First wall build. I'm going to start off with just one 3k and add another in the future. 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted January 29, 2014 Getting the front stage sounding pretty good so far pretty nice being able to control everything 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted February 12, 2014 Well about to start the new enclosure this week Its going to be around 6 cubes tuned about 34 (going to most likely make it so ill be able to change tuning). Going to be using a 10" round port this timeI'm thinking about 13" tall. 37" wide. And 32 deep. And 10" port close to 25-26" long (some of port will be out of the enclosure). Going to be using birch this time cause I'm really trying to cut down on weight 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted February 18, 2014 Had to replace the starter in the today. How long are they supposed to last? Just replaced it about a year ago 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted February 21, 2014 Couple recent enclosure I have done 1 Share this post Link to post Share on other sites
frogcase2002 393 Posted February 24, 2014 For 4 sa8v2's 0 Share this post Link to post Share on other sites
Aaron Clinton 2,372 Posted February 24, 2014 For 4 sa8v2'ssecuredownload-27.jpeg 0 Share this post Link to post Share on other sites
Dexter Chaos 14 Posted February 24, 2014 Well about to start the new enclosure this week Its going to be around 6 cubes tuned about 34 (going to most likely make it so ill be able to change tuning). Going to be using a 10" round port this timeI'm thinking about 13" tall. 37" wide. And 32 deep. And 10" port close to 25-26" long (some of port will be out of the enclosure). Going to be using birch this time cause I'm really trying to cut down on weightThose dimensions are close to what I built with my square port 80in port area. Tune to 32 originally. Wasn't musical enough for me wouldn't play more dubstep style music which is most of my listening. But also struggled on the lows(28hz and down but I believe they needed more space after some tips from this forum. I am interested to hear your results from the round port. I was thinking along the same path but was told to go to a 8in port to be able to play more range. Thoughts???? 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted February 25, 2014 I think I'm actually going to be trying and 8 inch port first 0 Share this post Link to post Share on other sites
Tenacious 32 Posted February 25, 2014 Had to replace the starter in the today. How long are they supposed to last? Just replaced it about a year ago Make sure you don't have an oil leak, that's what killed my starter.. same car (well, mines the 12 valve OHV) 0 Share this post Link to post Share on other sites
Dexter Chaos 14 Posted February 25, 2014 I think I'm actually going to be trying and 8 inch port first Definately interested in what you find. I found that 6 cubes seemed to be best for the my 2 12's. I forgot what you ended up finding out? I am building new enclosure come spring hopefully. 0 Share this post Link to post Share on other sites
frogcase2002 393 Posted February 25, 2014 I think I'm actually going to be trying and 8 inch port first Definately interested in what you find. I found that 6 cubes seemed to be best for the my 2 12's. I forgot what you ended up finding out? I am building new enclosure come spring hopefully. about 6.5 cubes with my last enclosure did pretty good. 0 Share this post Link to post Share on other sites