Decided on center console box for 95 Ext. cab Chevy

[GM959808 0]

 

Hope this image works. Its a very rough sketch of what I'm planning. It's roughly 2.5 cu. ft after port and before sub volume is removed. Subs firing down, port forward. This is roughly the outside dimensions I have to work with and am open to other sub/port configurations if they make sense. Subs will likely be SA-10s or maybe Gcon 10s. Torres calculator showed 32 hz tuning frequency, but I'm confused why it asks for a port diameter and port dimensions for a slot port??

 

Any opinions?

 

[GM959808 0]

I think my port area is way to small. Maybe something like 8.5"x3.25"x17" be better? Boxes 2 and 3 have those port dimensions.

Edited July 8, 2013 by GM959808

[GM959808 0]

Don't know why the box is showing upside down. Sheesh.

 

Anyway... anyone have any ideas? Bad idea, decent idea, port area too small??

[GM959808 0]

Can anyone help with this box design?? I don't know if the port configuration will work. Help please??

[Randal Johnson 544]

Wish I could help, I'm not an enclosure designer ...

Where in Tennessee are you located ?? Our team enclosure designer lives here in Pearl, Ms ...

[swift 501]

Where in TN are you? If Nashville area I could help with a custom design. 

[GM959808 0]

I work in Nashville. Any help would be greatly appreciated.

[GM959808 0]

Well...... I guess I will just build it and hope it doesn't sound like junk