1kw+ amp resistance with a poll!

[eric77 0]

I was just wondering what most 1kw + amps do max power at and remain stable according to manufacturer at. If your 1 ohm stable amp can go to .5 ohm stable with some modding lets classify it is as doing max power at 1 ohm for the sake of this thread. Feel free to post what amp you have, what resistance it does max power at, and what rms power at that resistance is.

[eric77 0]

I'll go first.

elemental designs nine.1

1 ohm

1400w or so rms

[Supa_c 1]

uhmm.....

what if its not 1K watts and i can EAISLY mod it to do a .5 ohm load ?

[BASS OUTLAW 0]

some Amps do their max at 2 ohms and drop at 1 ohm

nopt quite sure right now of the models

[eric77 0]

uhmm.....

what if its not 1K watts and i can EAISLY mod it to do a .5 ohm load ?

<{POST_SNAPBACK}>

dammit. I forgot about .5 ohm amps. For the sake of the thread lets keep this to 1kw + amps that are stable according to the manufacturer at whatever they do max power at.

[Supa_c 1]

welll

Its a HK-4000D

with a 1ohm load ( modded) it can do around 4K + RMS

Non modded @2 ohms its around 3600-3700RMS

I need to bench test it

[Acidburn 10]

what if we have one that does its power at 1 ohm and one that does its power at 2 ohms?

(Hifonics BX1500D and Tsunami DB1800T)

[eric77 0]

what if we have one that does its power at 1 ohm and one that does its power at 2 ohms?

(Hifonics BX1500D and Tsunami DB1800T)

<{POST_SNAPBACK}>

any mods wanna edit this poll to allow multiple votes and to include .5 ohm? I really screwed up on this one. lol.

[BASS OUTLAW 0]

some Amps do their max at 2 ohms and drop at 1 ohm

nopt quite sure right now of the models

<{POST_SNAPBACK}>

what if we have one that does its power at 1 ohm and one that does its power at 2 ohms?

(Hifonics BX1500D and Tsunami DB1800T)

<{POST_SNAPBACK}>

[iamamp3pimp 34]

i have 2 vipers so tech. they do power @ 1 ohm, but strapped, they do their power @ 2 ohms.

[idiot 7]

I'll be the first to vote 4ohms, then.

Avionixx AXT1200.2

1200W @ 4ohms

[johnecon2001 82]

My Arc's do a conservative 1050 @ 4ohms bridged. I benched the one on the subs and it pushes 1345 @ 4ohms.

[req 0]

dei 1100D - 1100w@1ohm

[Aaron Clinton 2,372]

the largest in my collection is the Orion 2500D, but I have a few older RFs that do power at 4ohms, but for now I voted with the Orion

[jntar 15]

275 HCCA

1200@1ohm

600x2@.05 ohm

[ZeroSKtr56 0]

Hifonics BX1500D. Rated 1500w @ 1ohm. 1000w @ 2ohm.

[Nikuk 1]

I have a few amps that I can get 3k+ @ 0.35 ohm on 14.1vdc.

But I also have One amp that can knock out just shy of 2kw @3.8ohm with 15.8 vdc.

Are we assuming 14.4 vdc or 12vdc or 17vdc?

Why not just ask if the output stage is regulated....

[bigger_george 2]

I have a RE 35.1D rated at 1 ohm but i think it has been able to get a little more power at slightly lower resistance.

[mrray13 30]

i've got the orion 2500d as well...rated at one ohm..but stable UNMODDED at lower impedences, which is where i voted..

and where i run it daily..lol..

and poll edited..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[eric77 0]

you guys have some powerful amps

[KickinAudio 5]

goliath @ .35 ...... better call for mommy

[dave_Edwards 1]

Phoenix Gold MS1000

rated 250x4 @ 4 ohm

1060x2 @2 ohm

birthsheet

1346X2 @ 2ohm

class AB power baby!!!

[Tirefryr 1,742]

Phoenix Gold MS1000

rated 250x4 @ 4 ohm

1060x2 @2 ohm

birthsheet

1346X2 @ 2ohm

class AB power baby!!!

Dave, do you actually use that thing? I'm guessing current consumption to be 300+ amps full tilt, little less with music? Just a rough estimate.

[UndercoverPunk 0]

Avionixx 1200.2

1200 to 1 bridged at 4 ohms...

[dave_Edwards 1]

yes I use it-----daily-----It is going in the Magnum along with a P9 set-up (wink wink Effendi) Brahma 15 MKII etc----read the sig.

Hell I was going to run the Revo 1500.1 @ 1 ohm(1610 watts) and run the PG MS1000 to my front stage only-----headroom anyone?