new box RL-p's *PICS*

[jellyfish420 0]

i'm almost done. i didn't use any glue, cause if it won't fit threw the hatch, then i'm gonna have to put it togother in the car:( it is ~5.9ft^3@25Hz for my 2 RL-p 15's. it has to stay in the hatch(backseat has to stay functional), and with the side windows in the way, this is as close as a wall as i could get.

enjoy! more tommorow

[Acidburn 10]

looks freakin sweet dude, cant wait to see it done and in the car

that box is ginormous btw

[Supa_c 1]

neet-o

Aint no wat that puppy is getting stolen

[Acidburn 10]

how much does that thing weigh jelly?

[jellyfish420 0]

how much does that thing weigh jelly?

<{POST_SNAPBACK}>

i don't know...its still missing the baffle, and some braces. plus two 40lb subs. i'm gonna guess the box to be around 60-70lbs. its almost 2 sheets of mdf.

[jellyfish420 0]

for those of you who are wondering how it's gonna fit in the car.....

[eric77 0]

that is very cool. I cant wait to see it in. Hurry up and install it

[Supa_c 1]

1 sheet is 100lbs

[traksta15 0]

how much port area does it have??looks good

[jellyfish420 0]

some more pics.

i'm waiting for someone to get here to help me lift this bad boy in the car now

[jellyfish420 0]

1 sheet is 100lbs

<{POST_SNAPBACK}>

are you sure? i didn't think 1 sheet = that heavy

its got 70in^2 port, same as the old box...

its 1 foot bigger, and tuned 11Hz lower

[Acidburn 10]

i bet its way more than 60-70 lbs, my 3.4 cubes tuned to 34 was 55 lbs and that thing is waaaay bigger

[Supa_c 1]

1/2 sheet was 50lbs on my scale

therefore...1 sheet must be 100lbs

[Acidburn 10]

1/2 sheet was 50lbs on my scale

therefore...1 sheet must be 100lbs

makes sense to me...

[Supa_c 1]

Get some rims or hubcaps for your car, jeez

[jellyfish420 0]

i cant find any 13" hubcaps that don't look cheap! and rims....

on that car...HA

here is somepics. i'm gonna go out and get like a 1" dowel or two for the baffle. there is

a little more flex than i was expecting it wouldn't fit in the car in one piece, so i put it all together except the top, 1 side, and the top port brace. slid it in, put the side on, then brace, then top. it went rather nicely, cause once in the car i could slide it around a little on only had to use a screw driver on like 2 screws with out any more jibber jabber.....

[Acidburn 10]

damn dude, thats insane

so the back seat folds back up and covers the subs?

and is it sealed up well?

[jellyfish420 0]

its siliconed every seam, front and back

[eric77 0]

thats not a bay seat I see is it? I can just imagine what social services will think about that.

[Acidburn 10]

i feel sorry for the kid in the car seat

[Supa_c 1]

Cool

[mrray13 30]

that box is insane!!

poor kid!!

nice work jelly!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[jellyfish420 0]

here is some pics of the brace i put in it. no more flex;) and another shot threw my door

[eric77 0]

you gotta love that tuned to 25 hz. If I had a pair and the room I would definitely tune that low. Afterall 2 rl-p 15's tuned to anytrhing is going to be loud enough,

Keep up the good work.

[Aaron Clinton 2,372]

wow that is some very nice work, tight fit