BTL Wiring Size

[BTL15 1]

I currently have a fi btl 15 fully loaded and i planed on using knu konceptz 8 gauge speaker wire but when i tried to wire the sub up the wires were too big haha...so is there anyway i can make the wires fit ive looked at banana clips and wire reducers but i dont know what to use and if it will distort or loose power

[slim2fattycake 85]

Cut some wire off or use smaller gauge. When I had 8 gauge in my SSDs, I had to cut quite a bit off to fit knu 8 gauge.

[jcarter1885 995]

Cut some wire off or use smaller gauge. When I had 8 gauge in my SSDs, I had to cut quite a bit off to fit knu 8 gauge.

x2, smaller wire will work as well since you dont really need 8 gauge for subwoofers.

[icy_chris 18]

i used a 10 guage on mine and it was beautifule to work with

[wutang512 3]

use 10 gauge it barely fit on my 12 BL

[Duran 387]

12 gauge works just fine, no need to break the terminal forcing so much wire in.

[bassahaulic 155]

I would use 12awg for anything up to 1,500rms. 10awg for up to like 2,500. and 8awg up from there.

[KU40 173]

Since it seems that you already have the wire, just cut strands off.

[Duran 387]

I put 4/0 on my tweeters yo!