is this a good box for the 12" BTL?

[whitesharingan 0]

I found this box on woofersetc.com

the dimensions are:

* 12" Single Ported Box

* Height: 15"

* Width: 30.5"

* Depth: 15"

* Mounting Depth: 11"

* 3/4" MDF Construction

* Volume: 3.00 cu. ft.

And I wanted to know if this would be a good box

for the fully loaded 12" BTL sub?

Thanks for any responses.

[NDMstang65 403]

That tells you nothing about the port..or tuning..

How about get one of the guys on the board here to build you a box?

[whitesharingan 0]

That tells you nothing about the port..or tuning..

How about get one of the guys on the board here to build you a box?

well the port is 2 1/16"X 13 1/3"X 29 1/2".

[KU40 173]

3.05 cubes gross, port displacement is 0.64, sub displacement is like .21 or something IIRC. So 2.2 cubes net, and tuning frequency is about 31 hz. Not too terrible.

[bassahaulic 155]

Is it a pre-fab box?

[whitesharingan 0]

Is it a pre-fab box?

Yea, it's from woofersetc.com.

one of there ground shacker series.

[PHATBOi 38]

Why spend ~$400 on a sub just to throw it in a $75 box? For ~$200 or less I'm sure there is someone on this forum that will build you a box for that beast. I used to use pre-fab Obcon/RT Boxes, they are probably the best pre-fab box you can buy and after getting iamamp3pimp to build my first custom box I will NEVER go back to pre-fab. A systems performance is 90% install and install is 90% box. You can take a Sony Xplod and put it in a well built 4th order and make it sound great. Just my $.02.