my SQ boxx

[Porchpup 0]

Deadening is a total PITA. It takes hours of work. This is my attempt. Two layers of RAAMmat on the outer skin.

This is after a layer of Ensolite on the outer skin and a layer of RAAMmat on the inner skin.

Don't have one of it finished but I covered the openings and added another layer of mat and a layer of Ensolite.

A Huge, Huge difference in mid bass. Knocking on these doors is like knocking on concrete.

[Lord Baccus 1]

Thats Sweeeeeeeeeet !!!

ill get on mine ASAP

ill have a lil more trouble getting to the outer skin

as the holes are not that big so ill have to piece it in there

anyone have suggestions on crossover points ?

i started with the 6db setup on the crossover

where do i need to set the Hu's crossover point ?

what freq?

and the mids ?

[///M5 2,833]

Start high and work your way back.

Start with 24dB slopes and ridiculous cross points and work your way in. It will take you hours to dial them in right, maybe days.

[Lord Baccus 1]

Start high and work your way back.

Start with 24dB slopes and ridiculous cross points and work your way in. It will take you hours to dial them in right, maybe days.

Thanks

did you notice that this thread started as a joke and has gotten very serious

i do take your addvice and try to work it into my SPL Explorer...

iv noticed that when i turn down the subs i have a lot of LOSE plastic rattles

gonna need a lot of sound dampener

where is the Raamat ? can i get it local in Dallas Tx or do i have to order it ?

i used P&S cuss i allready had 1/2 a roll and it was better that nothing

i know Bandaid was a good discription...

BUT it does sound dramaticlly different than the coaxials without and dampanning

Edited December 27, 2007 by Lord Baccus

[Porchpup 0]

where is the Raamat ? can i get it local in Dallas Tx or do i have to order it ?

You have to get from Rick at RAAMaudio.

http://www.raamaudio.com/cgi-bin/index.cgi

[afarfsin 0]

Go here and look. Read, pay attention. It's overkill, yeah, but he owns the company, so he was making an example.

http://www.secondskinaudio.com/forums/showthread.php?t=846

You need to do something similar, but not as extreme obviously.