SAE-1200D V.2 Teaser Pics !

[sundownz 197]

Updates :

1) Double sided PCB board (v.1 was single sided)

2) More primary input caps

3) Large brass bars for power supply current

4) Revised layout

5) Superior Soldering and assembly quality

Same power as the existing 1200D but overall higher quality throughout based on what we learned from the v.1 model.

Who would be interested in a pre-sale at, say, around $250

These amps are capable of 1500+ watts.

[Lucky 76 5]

Updates :

1) Double sided PCB board (v.1 was single sided)

2) More primary input caps

3) Large brass bars for power supply current

4) Revised layout

5) Superior Soldering and assembly quality

Same power as the existing 1200D but overall higher quality throughout based on what we learned from the v.1 model.

Who would be interested in a pre-sale at, say, around $250

These amps are capable of 1500+ watts.

release time est?

[shizzzon 461]

did the cost go down due to the option of a heatsink?

[Kanaworm$ 292]

Looks to be a smaller footprint and a nice $ price!

Edited August 13, 2009 by OldSkool_08

[dadydolas 1]

I would be interested in a presale depending on the expected release.

[videsh 0]

is that 200A of fusing i spy?

and wth all that power for $250 ?... jacob is a magician i tell you

[dadydolas 1]

will these be strappable?

[Aaron Clinton 2,372]

Looks good.

[Lucky 76 5]

is that 200A of fusing i spy?

your eyes have deceived you along with your common sense

Edited August 13, 2009 by Lucky 76

[jcarter1885 995]

is that 200A of fusing i spy?

your eyes have deceived you along with your common sense

Naw I see why he said that because most of the fuses that are red are 40A (there are 5 so I see why he thinks its 200Amps worth of fusing), but not all fuses are the same company.

If im not mistaking I think those are orange colored fuses which are 25A or 30A (so its more like 125A or 150A worth of fusing), considering Jacob makes efficient amplifiers and the SAZ-1500D has 4x40A (160A worth of fusing on it).

Edited August 14, 2009 by jay-cee

[inkfx 3]

That's a good presale. I almost paid that much for mine used a few weeks ago.

[sundownz 197]

It will have 150 amps for production.

[CrazyKenKid 64]

you know i was just going to send you an e-mail today asking about the 1200 v2!!! and for 250 i would be interested in a pre-sale!!!

[mattd0344 2]

will these be strappable?

x2 and is the case going to look the same as the V.1???

[sundownz 197]

will these be strappable?

x2 and is the case going to look the same as the V.1???

No and Yes.

[sundownz 197]

I'd like to break down the FETs in this amp vs. some of our other amps to really give you the idea of how beefy it is.

1) POWER SUPPLY

* 12x IRF3205, power dissipation rating of 2400-watts combined

* Our 4500D uses this same part number but 32 of them and can produce 8k+ on 18v reliably and over 5k on 14v. Think about it.

2) OUTPUT SECTION

* 8x Fairchild FDA59N25 for 3136 total watts rated dissipation (and these are very high current parts as well)

* Our SAZ-3000D had 12 IRFP360LC rated for a total of 3360 watts dissipation and could produce over 5kw on 18v reliably and over 3k on 14v.

So... put another way, the FETs will not be sweating at all to produce anything resembling rated power

[rushnrun 14]

too bad they're not strappable...

[Lucky 76 5]

so the casing is going to be the same and they will not be strappable?

Edited August 14, 2009 by Lucky 76

[sundownz 197]

Correct.

You an strap with a Maxx-Link but not internally to the amp.

[Lucky 76 5]

might have to then and link 3 and then another 3 ... what would i get for a combined average power at 1 ohm if i were to link 3 of these together?

[sundownz 197]

You can only strap amps as pairs.

[Lucky 76 5]

why does it say on the maxx link you can link up to 5?

[sundownz 197]

why does it say on the maxx link you can link up to 5?

5 pairs.

[Lucky 76 5]

why does it say on the maxx link you can link up to 5?

5 pairs.

o alright nvm then ... i guess ill have to stick with 2 3500s then because id have to buy 8 1200s then each strapped to its own sub lol and tune them down a lot

Edited August 14, 2009 by Lucky 76

[Lucky 76 5]

i might still be interested ... what is the projected release date?