Jump to content
BanginGMC

System playing at half of its potential?..

Recommended Posts

Okay so the other day i noticed my system was not playing the same. It seems to be playing at half of its potential!

So i waited and didn't listen to it for one day.. didn't even drive the truck. I just now took it for a ride and its true... something is wrong!

I pulled into an empty parking lot and played it at full tilt with the truck running in park, i was steady at 14v.. MY system is not suppose to be steady at 14v, i hit 151.8 dBs parked and the voltage dropped to low mid 12s and it was at the same volume as it was when i hit 151.8

It seems like the subs are only getting a couple thousand watts of power.

No i am not getting use to it..

I checked all 0gauge connections and grounds going into the amp and batts and around the whole truck.

The inline fuses for the amps to batteries aren't blown, alt fuse isn't blown, no fuses are blown.

I pushed down on both of the subs and the surround is still stiff and i did not hear ANYthing.. no coil rub.. weird sound.. nothing, just silence.

The subs/coils don't and never did smell.

Whats wrong here guys? I'm starting to freak out

Share this post


Link to post
Share on other sites

Grab a DMM and test the coils on the subs.

AirLFTN:lol crazy ass user names nowadays weres "not Steve Meade"

Edited by cheese20323

Share this post


Link to post
Share on other sites

stupid question but I'll ask anyways since this thread is just odd, your headunit settings haven't been changed since?

Share this post


Link to post
Share on other sites

Just bring it down and I'll figure it out

I cannot tonight, but tomorrow after work i can. Thanks mark!

stupid question but I'll ask anyways since this thread is just odd, your headunit settings haven't been changed since?

No settings have been changed.

Share this post


Link to post
Share on other sites

Measure voltage at the amp terminals while playing full tilt.

Share this post


Link to post
Share on other sites

So there was no real issue... we just turned the settings up (really odd.. idk why) and i'm not only just as loud.. i'm louder :)

152.6! :woot:

Share this post


Link to post
Share on other sites

bass vibrations made the truck scared and it turned your gains down by itself. Duh.

going for 153.X now? :D

Share this post


Link to post
Share on other sites

That's odd, well if your gain was turned down from the bass then your ssf may of done the same...

Share this post


Link to post
Share on other sites

Next time, you'll know what to do !

I did not understand what happened, hope you did !!!

When you talked about settings, was is only gain settings ? So, the gain turned down under too much bass pressure ! :WTFBubble:

Damn !

Share this post


Link to post
Share on other sites

Maybe the amps get rattled so hard the Gain get's turned down?

Gain was at the same.

bass vibrations made the truck scared and it turned your gains down by itself. Duh.

going for 153.X now? :D

FUCK YEAH! 154 son! hahah

Damn nice Sir!

Happy for you that it turned out to be nothing.

Thanks man!

That's odd, well if your gain was turned down from the bass then your ssf may of done the same...

Bass did not turn my gain down.

Next time, you'll know what to do !

I did not understand what happened, hope you did !!!

When you talked about settings, was is only gain settings ? So, the gain turned down under too much bass pressure ! :WTFBubble:

Damn !

I think....the suspension was stiff so with little gain it hit hard and tight and now the suspension is loose so it needed to be turned up?

..not realistic but only thing that comes to mind.

Share this post


Link to post
Share on other sites

You ended up taking it to Air.LFTN......kinda weird but now thats it's all good there should not be problems.

Share this post


Link to post
Share on other sites

You ended up taking it to Air.LFTN......kinda weird but now thats it's all good there should not be problems.

Weird how?

Share this post


Link to post
Share on other sites

Weird how it just lost output but you got it fixed and it ain't a problem anymore.

Share this post


Link to post
Share on other sites

Weird how it just lost output but you got it fixed and it ain't a problem anymore.

Late response i know, but Mark and I said the same.. i'm just glad it's fixed.

Share this post


Link to post
Share on other sites

good shit Bangin... Now find me a real amp for cheap!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×