knukoncept distro block question

[Robert 9]

I just installed the digital knukonceptz distribution block and connected a line for the ground so the digital display can work. My question is how long should the display stay on? Its been about 15min and its still on.

[Shogen 325]

I looked up the product and it didn't really say much. My assumption though is that it is a voltage monitor.. To me that means it will always be on...

[Robert 9]

I assume that is gonna drain battery over time....

[ralstonballa2413 20]

The amount that will be drained is so small that it would take many days of sitting to cause any type of problem for you.

[Shogen 325]

so it was on for 15min after shutting off the car??? Not sure mate... But it shouldn't really cause you an issue... Is there a lead/connection for remote turn on???

[Robert 9]

Sorry Iwent for some beer, no it does not have a remote lead just one of the two mounting holes has a piece of metal within the molding and thats for the ground. I will post pics.

[Julian 641]

If you really want it to turn off you can add a relay to it

[Robert 9]

And it is still on. I understand it might not do any harm but I just want to make sure.

And sorry for the funky wood work its just temporary!

Edited November 8, 2010 by crunkjuice1

[Robert 9]

As for the relay this is something I need to get hands on experience with, I was looking around in autozone but not sure which one to get.

[klee7013 10]

relay or add a switch to the ground should work also

Edited November 8, 2010 by klee7013

[Shogen 325]

what jerks .. I cannot believe they put a stick right where you need to read the damn voltage!

[Robert 9]

what jerks .. I cannot believe they put a stick right where you need to read the damn voltage!

LOL

[CrazyKenKid 64]

here is a relay pic! this helped me a lot!

as for which one to get get a 12volt 20-50amp lol

here is the one i use!

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=330-073

also this could help you to keep everything looking clean rather then a mess like mine is!

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=330-075

[CrazyKenKid 64]

keep in mind the ignition switch you can also use your remote (86) and use 87 for your meter

[Robert 9]

Thanks!