How to Disassemble a Speaker

[Acidburn 10]

Well I'm writing this for anyone who might care. I'll go through the steps of how to take apart a speaker(with pics of course).

Here are the supplies. 1 Koda6 (thank you Nick), 1 bottle of CA unbonding glue, and a utility knife

First, run the knife around the edge of the surround to separate it from the basket. The Koda has a stretchy rubber surround so it didnt really cut so well.

Then, just cut the speaker leads.

And detach the spider from the basket. This was the tricky part. I found that although being soaked in the CA unbonding glue for a few minutes, it just woundn't budge. So i just took the knife to that as well. It was quite flimsy and easy to cut.

And now you've got yourself a large magnet and a lovely little hat.

[CBFryman 2]

so yo ucan wear it and look like loyd L...

[Supa_c 1]

Poor kid, not his fault he is mentally retarded

[UndercoverPunk 0]

you can break it down further than that mang...

[Nikuk 1]

not bad.

now drill out the rivs holding the basket to the motor.

[UndercoverPunk 0]

I just smacked mine against the pavement really, REALLY HARD.

Off it came...

[Acidburn 10]

lol yep, both those methods work, im keeping this one intact... for now

[Supa_c 1]

not bad.

now drill out the rivs holding the basket to the motor.

<{POST_SNAPBACK}>

The SX was dissambeled as far as you could possibly go.

Dust cap off, basket and motor apart, coil un wound.

[Chevy350TPI 12]

That gives me faith ... tomorrow, I will do my best at gently picking apart a stock speaker.

[Supa_c 1]

Have fun on the spider

[60ndown 0]

acid,

can you now show me how to put it back together , with pis , and a small vidio of it playing!

[Acidburn 10]

acid,

can you now show me how to put it back together , with pis , and a small vidio of it playing!

uhhh... i have vids of it "playing" but its not going back together

[djjdnap 78]

where did you get the unbonding glue??

[Acidburn 10]

where did you get the unbonding glue??

hobby shop

[UndercoverPunk 0]

Why didn't you use it?

[Acidburn 10]

Why didn't you use it?

i tried, i soaked it and let it sit for like 10 minutes and nothing happened, so im like screw this and cut it

[ngsm13 1]

Yeha, now try that with a TOTTIE JOHSON apporved MT. Lol...Quad Triple Stiff spiders, MASS specially formulated CA Glue...it's redic.

NG

[Supa_c 1]

* busts out the blow torch*

[Aaron Clinton 2,372]

* busts out the blow torch*

stay clear of me, I had mexican last night

[CBFryman 2]

* busts out the blow torch*

<{POST_SNAPBACK}>

*busts out the oxy acetalien (sp) torch*

*doesnt work*

*plasma cutter*

*basket go bye bye*

[UndercoverPunk 0]

[NDMstang65 403]

Yeha, now try that with a TOTTIE JOHSON apporved MT. Lol...Quad Triple Stiff spiders, MASS specially formulated CA Glue...it's redic.

NG

Get ya a REALLY strong arm and one hella sharp paper knife

comes right apart

[Nikuk 1]

<{POST_SNAPBACK}>