Active Front Stage Build

[sefugi 166]

Door Pods!! Wanna do mine???

Ummmm !

[Bob345 39]

There might be a future issue with the speakers clearence. You should take into mind the thickness of the fleece and fibers glass because it looks like it's a little too close.

Actually that is the floor mat that looks so close. It actually clears the door frame with ease with a little room to spare.

I see.

[klee7013 10]

looking good--- all build logs should have to include pictures of the dog(s)

[cheese20323 13]

Nice!

[Kanaworm$ 292]

Thanks everybody!

More pics tomorrow as I have the floor dampened and all the wiring routed and ran.

[cheese20323 13]

Is this an SQ setup......

EDIT: I just saw your running an 18 DR damn now put some rims on that thing.

Edited August 19, 2010 by cheese20323

[Kanaworm$ 292]

Front stage will be all out SQ. DR 18 in the back for a little bass ....

New rims and tires are in the budget but probably not till next year.

[cheese20323 13]

Little Bass........

some 24's look found you some........look good on any chevy vehicle.....Good Luck!

[Kanaworm$ 292]

Whoa! Those are nice rims! Send me the link! ...

[cheese20323 13]

This a rims page from my local dealer......suit yourself lol.....

:: Audio City SPECIAL ::

[j-roadtatts 1,129]

The doors are coming along nicely!! I am definetly tuned until the end of this build.

Heres a link to my doors at the current moument. I plan on doing a build log on the doors when I'm done.

The link, go to page 7 if its not already there.

Help choosing a 10 inch midbass driver. - SSA Car Audio Forum - Page 7

[Kanaworm$ 292]

Wiring is all done got some pics taken before the camera battery died.

All new 15 gauge RF Twisted Gamma Technology Speaker Wire.

New run of 1/0 Stinger HPM positive. Forgot the run of Negative ...

All new Black RF Matrix Twisted RCA's.

Went with an all black and silver theme to match my Sundown Amplifiers.

Beginning

Drivers side

Closeup of drivers side

and finally the back

Carpet and interior all back in. Will work on the kicks and doors as family allows.

[sefugi 166]

Very nice work on the wiring! I can see the time you spent by the pics.

[j-roadtatts 1,129]

The wiring is lookin' clean, always fun once you get that much under the carpet. Thats some crazy looking speaker wire. Keep on truckin'!!

AND Hopefully the family will allow you to finish the pods sooner than later..... I know the feeling.

[Kanaworm$ 292]

The wiring is lookin' clean, always fun once you get that much under the carpet. Thats some crazy looking speaker wire. Keep on truckin'!!

AND Hopefully the family will allow you to finish the pods sooner than later..... I know the feeling.

Thanks man!

[Kanaworm$ 292]

Back to work tomorrow but when I get home I plan on doing the second door. 90+ degree heat makes the curing process go much faster ....

Have an idea of doing the kicks and pods in a gloss white to match the exterior of the truck.

Any thoughts on that idea?

[Kanaworm$ 292]

Very nice work on the wiring! I can see the time you spent by the pics.

Thank You!

[j-roadtatts 1,129]

Back to work tomorrow but when I get home I plan on doing the second door. 90+ degree heat makes the curing process go much faster ....

Have an idea of doing the kicks and pods in a gloss white to match the exterior of the truck.

Any thoughts on that idea?

You could paint eveything white and then clear coat it, that would look clean.

This time around on my doors, I plan on first painting with a matching interior colored base coat, and then I am going to airbrush some artwork on the doors and clear coat them.

[Kanaworm$ 292]

The wife's cousin air brushes and custom paints custom choppers. I have a lot of ideas for the doors!

[j-roadtatts 1,129]

The wife's cousin air brushes and custom paints custom choppers. I have a lot of ideas for the doors!

Ideas for your doors or mine?

I got an airbrush kit traded to me this year from a friend. I have never airbrushed before, but will be giving it a try. I have been a Custom Tattoo Artist for 17+ yrs so I should be good, just a different medium of art.

I am planning on painting a city skyline along the bottom of the door and music notes flowing out of the speaker. I will do some ghost skulls or something in powder grey behind everything and then clear coat with Acyrlic or Lauquer. Should look EXTRA sweet!! or thats the idea anyways.

[Kanaworm$ 292]

The wife's cousin air brushes and custom paints custom choppers. I have a lot of ideas for the doors!

Ideas for your doors or mine?

My doors!

Going to be adding a flush ring to the doors so it looks flush with the grill attached.

Nothing to out of the ordinary going to have him do something evil with the Sundown Logo along the map pocket area.

Will see how my finish sanding is and whether the patience holds out for that nice shiny finish!

[Kanaworm$ 292]

Finally got around to building the box for my new Sundown SA-15's

First the Design

The Fiberglass Plate (JL Audio ISO-Plate)

Test fit before primer and paint

The Port after primer

Port primed and painted

Box assembled and ready for black paint (Herculiner Box Liner)

First coat of black

Completed box just needs some touch up

I didn't take very many pictures during cutting and assembly as they are pretty straight forward. I tweaked the original design a bit to give it the full recessed look.

This box will house two Sundown SA-15" D4 subwoofers.

Thanks to Bromo for the design Eclectic Enclosure Design

[sefugi 166]

That's Damn nice!!! I got 4 of the SA-15's, wanna build me 2 of those? JK, planning on getting with Bromo myself.

[jcarter1885 995]

Badass box man, the mounting baffle and port

[Kanaworm$ 292]

That's Damn nice!!! I got 4 of the SA-15's, wanna build me 2 of those? JK, planning on getting with Bromo myself.

Badass box man, the mounting baffle and port

Thanks guys! Appreciate the kind words!