box?

[jellyfish420 0]

the 4 ft will be below the windows, and the 6 will be above the windows.

the 6 can be plugged to ~7ft @ ~32-34Hz w/ ~ 75^2 port. the other one i haven't sat down to figure it out yet...

i think i wanna go under the window if i do decide to compete, cause i don't know how well i'd do in the higer class

what you guys think?

[djjdnap 78]

try both see what your numbers are for the under the win and if you like it stick wt it, if not try something else

[ngsm13 1]

Not good...

NG

[jellyfish420 0]

Not good...

NG

<{POST_SNAPBACK}>

not good what? i had the RL-p's in a box that was 4.5ft^3 under the window, @ 37Hz w/ 68in^2 port and did a 151db on the old TL. and this one would be tuned higher and have more port.

[jellyfish420 0]

Not good...

NG

<{POST_SNAPBACK}>

not good what? i had the RL-p's in a box that was 4.5ft^3 under the window, @ 37Hz w/ 68in^2 port and did a 151db on the old TL. and this one would be tuned higher and have more port.

<{POST_SNAPBACK}>

?????

anyone else have an opinion???

[02BlackOnBlackSS 1]

If you go over the window line, competition will be a lot stiffer.

[LB audio 0]

Yellyfish 420 YGPM

[CBFryman 2]

if your going over the window line may as well wall it

so 4cuft, if results are undesirable try the other enclosure...MDF is like 20 bucks a sheet screw maybe 10bucks for 2 lbs and a $7

thing of wood glue... so if you use 2 sheets thats $57 unless you think you have to make it purdy

the window line is what will keep me from compeating any further than local with my current enclosure. but me thinks in a year + senior project...hmmmmm wall or S-2??

[jellyfish420 0]

if your going over the window line may as well wall it

so 4cuft, if results are undesirable try the other enclosure...MDF is like 20 bucks a sheet screw maybe 10bucks for 2 lbs and a $7

thing of wood glue... so if you use 2 sheets thats $57 unless you think you have to make it purdy

the window line is what will keep me from compeating

[ANeonRider 3]

Do you know the resonant frequency of the car?

[KickinAudio 5]

Depending on what organization you compete with, they don't all have window line rules.

[jellyfish420 0]

Depending on what organization you compete with, they don't all have window line rules.

<{POST_SNAPBACK}>

what are the diff organizations? and do you got any links to an event calander for the diff orgs.? i'm really open to any of them, i just want something where i can go to more than 1-2 comps a year w/o driving 5-6 hours

and no i don't know the res freq. i'm just basing the tuning on 40 shouldn't be too high for daily driving, and 40 will, more than likely, peak higher than my 35 box.

[CBFryman 2]

MECA i know has window regs, i dont know about dB drag or ISCA or w/e it is.

[jellyfish420 0]

MECA i know has window regs, i dont know about dB drag or ISCA or w/e it is.

<{POST_SNAPBACK}>

the dbdrag rule says that any equiptment above the window line is considered to be a wall...but that db drag i went to a couple weeks ago i was classed SS 1-2 NW , huh?

[KickinAudio 5]

Correct, a "NW" no wall class. You can have lots more equipment, just no wall.

I'm guessing STL is St Louis?? So here are some shows.

Db Drag

July 23rd Moberly, MO

July 24th Springfield, MO (2X)

August 13th Moberly, MO

Meca

July 23rd Bolivar, MO

July 23rd McHenry, IL

IASCA

July 23rd Galesburg, IL

[jellyfish420 0]

Correct, a "NW" no wall class. You can have lots more equipment, just no wall.

I'm guessing STL is St Louis?? So here are some shows.

Db Drag

July 23rd Moberly, MO

July 24th Springfield, MO (2X)

August 13th Moberly, MO

Meca

July 23rd Bolivar, MO

July 23rd McHenry, IL

IASCA

July 23rd  Galesburg, IL

<{POST_SNAPBACK}>

you know the closest of those comps are about 3 hours away, the ones in il are a good 6-7 hr drive

you forgot one though

IASCA

july 24th Granite City, IL @ NOPI 25min away

[KickinAudio 5]

I drive 6hr's for shows, why can't you

[jellyfish420 0]

because i'm not

besides i don't know if id trust my car on trips over prob. 2 hrs away...