Welcome to the IHoP

[Adrian_D 520]

Fcuk this box design. 0.4cf ported. 28 inches of port length. If the box has some reasonable outer dimensions, I can't fit the port without a bunch of bends.

LOL, that is a short port for such a small box....you liking to huff?

8 inch speaker, 3 inch port, it's a bit on the small side. And slight correction, it's 0.35cf

But with this ridiculous driver I can't tune anything lower than 40hz or it will move too much even with 150 watts. The Helix recommended box is tuned to 60hz.. german "high" quality gear.

[Adrian_D 520]

Today is one of those days when I'd love to have a go-fast mobile...

[dem beats 1,223]

only thing I huff is the sent of noobs being pwned

[dem beats 1,223]

and some shoe repair glue long ago in another life.

not with the intent to get blasted... Though my co worker burned a few billion cells with Barge Cement.

[Penguin4x4 1,761]

looks like I'm officially being an uncle again; wedding is on new year's eve...yee haw...

[Penguin4x4 1,761]

good ole viral marketing

[Penguin4x4 1,761]

For those of you not scared of germs I dare you to drink some raw chicken juice...or just pour it on your salad. You'll come back and change your tune.

Am I scared of germs? No, but will I take reasonable precautions, good practices, etc? Yep, I sure will.

Then don't cut chix on wood

even if I keep my wood boards in good condition and oiled and then wash after?

I have always used wood for everything. I only started using plastic for the wife. Can you cut any meat on wood?

I like using poly for proteins simply because I can come very close to sterilizing one in the dishwasher afterwards; once they deteriorate though you have to trash em, whereas with a wooden board you sand/plane it, reseal it, and its ready to go.

Like Sean suggested you can use a liner, works great

[Aaron Clinton 2,372]

Fcuk this box design. 0.4cf ported. 28 inches of port length. If the box has some reasonable outer dimensions, I can't fit the port without a bunch of bends.

LOL, that is a short port for such a small box....you liking to huff?

8 inch speaker, 3 inch port, it's a bit on the small side. And slight correction, it's 0.35cf

But with this ridiculous driver I can't tune anything lower than 40hz or it will move too much even with 150 watts. The Helix recommended box is tuned to 60hz.. german "high" quality gear.

[Tirefryr 1,742]

Looking into buying one of these. There is a long way to go till I get the money tho.

is that a celica??

Yes, sir! I want a T23 but it's lot more $.

Buy an impreza if you want J style awd winnar car. more parts, more support, more better.

The Impreza is the ugliest POS ever. The AMC Matador is far more attractive in any flavor.

[Dutchie. 10]

Looking into buying one of these. There is a long way to go till I get the money tho.

is that a celica??

Yes, sir! I want a T23 but it's lot more $.

Buy an impreza if you want J style awd winnar car. more parts, more support, more better.

The Impreza is the ugliest POS ever. The AMC Matador is far more attractive in any flavor.

Escort Cosworth

Sierra Cosworth

Both better awd cars in my opinion. I could list some more ..

[dem beats 1,223]

Eh, the impreza is Japan style all the way. I kind of like that they don't hide it, they celibrate it's rice powa.

It was faster(up to the 120+mph area) and easier to drive that the 996 of which a friend had both, and much more tame and winterable..... not that he didn't drive the porche in the winter.

I think it gives a lot for a low cost. It's just uglyish and built with low cost parts everywhere but the drivetrain. Some years of their engines suffered bad though so not really that perfect engine wise.

The non turbo 996 pre 2001(or 2002) also have engine problems that actually had total failure issues.

Anyway, I agree with you. Ugly as all hell, but if you can fit in one, and you can ignore the boy racer flava, it's a lot of fun on the cheep.

[MKader17 332]

Looking at a sound card. Is their any reason to go for the more expensive option from turtle beach. I was planning to initially but don't know what else it offers...

http://www.turtlebeach.com/products/sound-cards/montego-ddl.aspx

http://www.turtlebeach.com/products/sound-cards/riviera.aspx

[Penguin4x4 1,761]

If you've determined the current Mercedes-Benz E-Class Estate doesn't have the room you need to stretch your legs, Binz has the answer. The company has released photos and specifications for its XTEND version of the Silver Arrow's long roof, and the new machine has enough cubes to comfortably ferry around an NBA team and a pilfered sarcophagus or two with room to spare. At nearly 19 feet long, the stretched wagon has a wheelbase of over 12 feet and hits the scales at 4,629 pounds.

Binz is offering the E-Class EXTEND in E250 CDI, E350 CGI and E500 configurations, with prices starting at €121,950.

A Benz designed especially for Sean!

[Julian 641]

For those of you not scared of germs I dare you to drink some raw chicken juice...or just pour it on your salad. You'll come back and change your tune.

Am I scared of germs? No, but will I take reasonable precautions, good practices, etc? Yep, I sure will.

Then don't cut chix on wood

even if I keep my wood boards in good condition and oiled and then wash after?

I have always used wood for everything. I only started using plastic for the wife. Can you cut any meat on wood?

I like using poly for proteins simply because I can come very close to sterilizing one in the dishwasher afterwards; once they deteriorate though you have to trash em, whereas with a wooden board you sand/plane it, reseal it, and its ready to go.

Like Sean suggested you can use a liner, works great

Yeah you're not supposed to cut meat on wood because it's porous.if I had kids/ old folks in my house I'd never think about using anything but plastic for my cutting boards.

[Dutchie. 10]

Sex

[Tirefryr 1,742]

There's some stateside Sierra owners on turboford.net

Also some very nice Merkurs.

[nem 2,019]

let me know if you do Sean. I almost thought about buying one. My electrolux is crapping out of me. The bearings in the beater bar are going to pot. Can't get parts as it got too hot and melted some plastic. I tried all kinds of oil and grease.... what finally worked? I cleaned it with sea foam and used plean petrolium jelly for the grease.

Nothing else worked.

Anywhosle... if it dies to go bagless would be nice.

I have been using the (Animal) DC-28 for 7 years. I have replaced the beater bar once and clean it every 5 or 6 months. Still working great. Also I have 2 dogs and a cat. No complaints and yes I have used some very nice machines in the past, filter queen, hoover, and rainbow (amway) to name a couple.

[nem 2,019]

First real snow fall today, I am hoping to see at least 12" or more. I enjoy watching people driving like they have never seen or driven in snow before.

7 mile drive home from work took almost 30 minutes

[lithium 358]

First real snow fall today, I am hoping to see at least 12" or more. I enjoy watching people driving like they have never seen or driven in snow before.

7 mile drive home from work took almost 30 minutes

wow you guys got a hell of alot more then here so far, only about 2inch or so here.

[lithium 358]

started a thread on a new front stage, if you guys have some advice feel free to comment, m5 has it pretty much taken care of already. linky link

[NB50 206]

http://www.youtube.com/watch?v=qyQb192-CPQ

Don't know why but I get a kick out of this commercial.

[///M5 2,833]

looks like I'm officially being an uncle again; wedding is on new year's eve...yee haw...

Weddings are a great place to get laid.

[Tirefryr 1,742]

http://www.youtube.com/watch?v=qyQb192-CPQ

Don't know why but I get a kick out of this commercial.

X2.

[///M5 2,833]

let me know if you do Sean. I almost thought about buying one. My electrolux is crapping out of me. The bearings in the beater bar are going to pot. Can't get parts as it got too hot and melted some plastic. I tried all kinds of oil and grease.... what finally worked? I cleaned it with sea foam and used plean petrolium jelly for the grease.

Nothing else worked.

Anywhosle... if it dies to go bagless would be nice.

I have been using the (Animal) DC-28 for 7 years. I have replaced the beater bar once and clean it every 5 or 6 months. Still working great. Also I have 2 dogs and a cat. No complaints and yes I have used some very nice machines in the past, filter queen, hoover, and rainbow (amway) to name a couple.

Cool. Good to hear. We have no animals and they have the next step down but I figure more suck is better in one thing and that is a vacuum.

[Aaron Clinton 2,372]

Sex

My first car was an 86 Merkur.