Need cheap 1/0 ANL fuse holders

[AllenH427 10]

I need 5 ANL fuse holders that supports 1/0 wire. The cheaper the better, any ideas?

[Julian 641]

http://www.amazon.com/Absolute-ANH1-ANL-FUSE-HOLDER-ABSOLUTE/dp/B000VW978I/ref=sr_1_40?ie=UTF8&qid=1296184462&sr=8-40

cheapest i've found...ever

[CrazyKenKid 64]

here is some i used back in the day!

http://cgi.ebay.com/FULL-SIZE-BIG-ANL-FUSE-HOLDER-300-AMP-1-0-2-4-8-GAUGE-/200502521201?pt=LH_DefaultDomain_0&hash=item2eaee1ad71#ht_2176wt_1139

multiple orders = 1 shipping price! lol!

http://cgi.ebay.com/CAR-AUDIO-AMPLIFIER-AMP-ANL-WAFER-CARTRIDGE-FUSE-HOLDER-/120674595978?pt=LH_DefaultDomain_0&hash=item1c18c4348a#ht_1754wt_1139

there is more on ebay of this style lots!

http://cgi.ebay.com/INLINE-ANL-FREE-FUSE-w-HOLDER-BLOCK-GOLD-0-4-GA-GAUGE-/290527593661?pt=LH_DefaultDomain_0&hash=item43a4cb44bd#ht_3710wt_1139

ugliest one i know on the net! lol

[ssh 924]

here is some i used back in the day!

http://cgi.ebay.com/FULL-SIZE-BIG-ANL-FUSE-HOLDER-300-AMP-1-0-2-4-8-GAUGE-/200502521201?pt=LH_DefaultDomain_0&hash=item2eaee1ad71#ht_2176wt_1139

multiple orders = 1 shipping price! lol!

http://cgi.ebay.com/CAR-AUDIO-AMPLIFIER-AMP-ANL-WAFER-CARTRIDGE-FUSE-HOLDER-/120674595978?pt=LH_DefaultDomain_0&hash=item1c18c4348a#ht_1754wt_1139

there is more on ebay of this style lots!

http://cgi.ebay.com/INLINE-ANL-FREE-FUSE-w-HOLDER-BLOCK-GOLD-0-4-GA-GAUGE-/290527593661?pt=LH_DefaultDomain_0&hash=item43a4cb44bd#ht_3710wt_1139

ugliest one i know on the net! lol

I think I bought my ipod cable from the first guy. After I ordered it, I noticed he lives in the same city as me. What are the odds...

[Sir-Lancelot 216]

http://www.amazon.com/Absolute-ANH1-ANL-FUSE-HOLDER-ABSOLUTE/dp/B000VW978I/ref=sr_1_40?ie=UTF8&qid=1296184462&sr=8-40

cheapest i've found...ever

I buy a good bit of this type stuff on Amazon too.

I love Amazon

[sefugi 166]

I found these a while back, not as cheap as the others mentioned but you don't need eyelet connectors for them and they have several choices.

http://www.tti-plus.com/Car-Audio-0-Gauge-Fuse-Holders-s/86.htm

[smashedz28 110]

i should have done some more shopping when i bought all my damn fuse holders, went with the $20 per knukonceptz. think i bought 5 of those suckers. what a waste.

[nem 2,019]

For all the more they are, why not make your own?

[AllenH427 10]

I found these a while back, not as cheap as the others mentioned but you don't need eyelet connectors for them and they have several choices.

http://www.tti-plus.com/Car-Audio-0-Gauge-Fuse-Holders-s/86.htm

These actually come with a free fuse though, so just for the holder it's only like $3 more, plus I dont need a connector, would any of you guys trust this site?

http://www.tti-plus.com/Bluewave-Platinum-ANL-Fuse-Holder-p/bw-anhs21.htm

The only thing shady about these, it looks like you use a tiny alan wrench to secure the wire...

[sefugi 166]

I found these a while back, not as cheap as the others mentioned but you don't need eyelet connectors for them and they have several choices.

http://www.tti-plus.com/Car-Audio-0-Gauge-Fuse-Holders-s/86.htm

These actually come with a free fuse though, so just for the holder it's only like $3 more, plus I dont need a connector, would any of you guys trust this site?

http://www.tti-plus.com/Bluewave-Platinum-ANL-Fuse-Holder-p/bw-anhs21.htm

The only thing shady about these, it looks like you use a tiny alan wrench to secure the wire...

Check this page of our build, we used some of them and they seem to be fine for an inexpensive solusion.

[The enD 467]

For all the more they are, why not make your own?

+1

Heat and bend some plexiglass, engrave something on it, get fancy with some LEDs if you want, use bolts to attach the fuse...

[AllenH427 10]

Looking good so far, now anyone know where I can get some quality 1/0 ring terminals with a 3/8" hole for a good price?

[Julian 641]

Looking good so far, now anyone know where I can get some quality 1/0 ring terminals with a 3/8" hole for a good price?

https://www.vtewarehouse.com/html/clearance.php

14 cents each.. 1 gauge should fit the 1/0 with minimal trimming.. minimum order of 15$ though.. i bought 200 lol.

[AllenH427 10]

Looking good so far, now anyone know where I can get some quality 1/0 ring terminals with a 3/8" hole for a good price?

https://www.vtewarehouse.com/html/clearance.php

14 cents each.. 1 gauge should fit the 1/0 with minimal trimming.. minimum order of 15$ though.. i bought 200 lol.

They don't have 1/0 or 2/0 with 3/8" holes.

[Shogen 325]

http://cgi.ebay.com/20-pack-0-1-Gauge-3-8-Gold-Ring-Terminals-Premium-NEW-/220731199690?pt=LH_DefaultDomain_0&hash=item33649ad0ca .. I bought from this seller on ebay

[Shogen 325]

This guy half the price with $2.00 shipping charge. http://cgi.ebay.com/20-GOLD-PLATD-RING-TERMINALs-8-GAUGE-3-8-HOLE-NEW-grt08-/360105540927?pt=LH_DefaultDomain_0&hash=item53d7f67d3f

[Soapbox 7]

Fuse holders have a WIDE range of quality. That said I have used just about every style but have a new favorite

The highest quality incorporating the use of 4 fuses with 2 zero in and 2 zero out.